How to Setup CCcam on Technomate

To install cccam on technomate boxes, Simple procedure has to be followed.

 

First start up your box. Now follow these steps:

-Press and hold the power button on your box front panel as it starts up

-A number will appear in your front display and thats what your box IP Address ends in.

Note: For example if the number is 5, then your box Ip Address is 192.168.2.5

-Now with a web browser you need to connect to that IP by typing it in the browser.

Note: Remember your PC/Laptop must be on the same IP range 192.168.2.xxx

-On bottom right of this page you`ll see "CCcam Edit" under the menu Edit Email Config. Press "Click"

 -If it requests for password, type and proceed

-Finally a field will appear with a button beside it called "Add Line"

-Remember the line format you should enter is like this: C: server port user pass

 

This was the standard procedure for installing CCcam on technomate boxes.

Esta resposta foi útil?

 Imprimir este Artigo

Leia também

How to set cccam in Iris 9900 HD

In this tutorial I will try to explain briefly how to configure cccam in 9900 Iris HD decoders,...

Samsat HD 80 CCcam Setup

Using USB and CCcam.cfg file:Menu / Tools / CAS  /CAS Options / network sharing / read cccam.cfg...

VU+ CCcam Setup

For transferring the CCcam.cfg file into your VU+ SOLO or DUO, you need to use a FTP client. we...

Cloud Ibox 4 CCcam Setup

1. Stick on a clone safe image2. Do your basic setup/ forget the channel scan say you will di it...

How to Make CCcam.cfg file

Most of the satellite receiver boxes need CCcam.cfg file with your CCcam lines in it in order to...