How to Setup CCcam on Technomate
To install cccam on technomate boxes, Simple procedure has to be followed.
First start up your box. Now follow these steps:
-Press and hold the power button on your box front panel as it starts up
-A number will appear in your front display and thats what your box IP Address ends in.
Note: For example if the number is 5, then your box Ip Address is 192.168.2.5
-Now with a web browser you need to connect to that IP by typing it in the browser.
Note: Remember your PC/Laptop must be on the same IP range 192.168.2.xxx
-On bottom right of this page you`ll see "CCcam Edit" under the menu Edit Email Config. Press "Click"
-If it requests for password, type and proceed
-Finally a field will appear with a button beside it called "Add Line"
-Remember the line format you should enter is like this: C: server port user pass
This was the standard procedure for installing CCcam on technomate boxes.
Was this answer helpful?
Before setup oscam Stop and remove your cccam EMU else system will ban your IP and reject your...
Skybox F5 CCcam Setup
Format USB to FAT32 (on your pc)Turn on F5, let it boot up and put USB in the backUsing remote...
Openbox and Skybox CCcam Setup
ATTACH BOX TO POWER CABLE, SATELLITE CABLE, HDMI CABLE AND NETWORK CABLECLINE SETUP1: Go into the...
Ariva 150 CCcam Setup
DO NOT load any channel file from any other receiever as it will brick you box, only files for...
Engel RS 4800 Y CCcam Setup
1- Open notepad on pc.2- Enter your cccam lines 3- Save the file as CCcam_Newcamd.cfg4- Put the...